- 36299862638744, no_call_for_price
- 36299862671512, no_call_for_price
- 36299862704280, no_call_for_price
- 36299862737048, no_call_for_price
- 36299862769816, no_call_for_price
- 36299862966424, no_call_for_price
- 36299862999192, no_call_for_price
- 36299862802584, no_call_for_price
- Regular price
- $207.92
- Sale price
- $207.92
- Regular price
-
- Unit price
- /per
Lucas Universal Thermoplastic Roof Coating #6000 - Full Range
Adding product to your cart
Est Delivery between
and
.
Estimated Delivery Time 3-5 Working Days
Lucas #6000 Universal™ Roof Coating is a solvent-based terpolymer coating intended for the repair and restoration of asphalt, modified bitumen, metal, Kynar®, concrete, TPO, Hypalon® (CSPE), PIB and EPDM roofs. Extremely fast drying. Skins over in minutes and cures completely in a few hours. Won’t wash off or pick up debris. Lucas #6000 is available in Energy Star white and custom colors. When Installed in white, #6000 will reduce the roof’s surface temperature which reduces stress from daily heat cycles. It will also reduce the heat gain in the building’s interior, any associated air conditioning costs and increase the efficiency of roof mounted air conditioning condensers.
Application:
Surface to be coated must be dry and free of dirt or corrosion particles. #6000 may be applied to wet surfaces as a temporary repair measure only. Its high density and water displacing abilities allow adhesion to wet and underwater surfaces. In conventional applications, first apply Lucas #115 Universal Wash and power-wash according to directions.
Before applying coating, close all fresh air intakes and other potential points of entry for solvent vapors into the building. All penetrations should be sealed with #6500 Universal Flashing Cement. On metal roofs any grade of #5500 Seam Sealer may be utilized. For best results, apply the product with a 3/4 to 1 1/4 inch nap roller or suitable spray equipment. Apply successive coats at right angles when possible. Mix the coating thoroughly before application. For best results, maintain coating temperature at 50° F or higher. Roof temperature should be above freezing during application. Once applied, the coating is unaffected by temperature.
Allow a minimum of 24 hours between coats on asphalt, modified bitumen and EPDM roofs. For all other roof types, allow four hours between primer and/or base coats and the finish coat. All roofs must be cleaned with #115 prior to application of this product.
Please Note: This product is not available in California.
brand | Lucas |
Flash Point | 103°F / 39°C |
Material Type | Terpolymer |
Permeability | < 1 perm |
Tensile Strength | 1100 psi |
Weight Per Gallon | 9.2 lbs |
Est Delivery between
and
.
Delivery will always take place on a weekday (Mon - Fri).
For information on delivery costs and more view our delivery info page.