Please Note: Due to excessive shortages in raw material some orders may be delayed prior to dispatch. Roofing4US will notify the customer if there are delays.

Thermoplastic Base Coating #5100 Roof Coatings
Thermoplastic Base Coating #5100 Roof Coatings
  • Load image into Gallery viewer, Thermoplastic Base Coating #5100 Roof Coatings
  • Load image into Gallery viewer, Thermoplastic Base Coating #5100 Roof Coatings
LUCAS

Lucas Thermoplastic Base Coating #5100 - Full Range

The option you have currently selected is a call to inquire option. Please call us on 281-657-1443 for more information or select an alternative option.
Regular price
$138.47
Sale price
$138.47
Regular price
Sold out
Unit price
per 
+
LUCAS

Lucas Thermoplastic Base Coating #5100 - Full Range

Product Code: L-5100-5

Polymer based Lucas #5100 Thermoplastic Base Coating is an elastomeric solvent based coating intended for the repair and restoration of metal, TPO and Hypalon roofs. Use on barns, warehouses, metal trailers and shipping containers. Ultra-low moisture permeability prevents corrosion while high elasticity allows conformation to building movement.

Lucas #5100 is based on tough, elastic Styrene Ethylene/Butylene Styrene polymers and a clear adhesive hydrocarbon resin in an aromatic hydrocarbon vehicle. High reflectivity is maintained due to the incorporation of high quality titanium dioxide. Additionally, high loadings of antioxidants and light stabilizers ensure durability throughout roof service life.

This product comes in a base coat gray color.

Application:

Surface to be coated must be dry and free of dirt or corrosion particles. All seams, fasteners and penetrations should be sealed with #5500 Seam Sealer. The roof must then be coated with Lucas #5100 Thermoplastic Base Coating at a rate of 1.25-1.5 gallons per 100 square feet. MECHANICALLY MIX coating thoroughly and continuously before and during application. For best results, maintain coating temperature at 70° F or higher. Roof temperature should be above freezing during application.

Once applied, the coating is unaffected by temperature. When the Base Coating is cured, apply the Top Coating at a rate of 1.25-1.5 gallons per 100 square feet. For best results, apply coating in one direction with the slope of the roof. Roofing asphalts may cause staining. As this condition is unpredictable, we recommend that the user apply a small amount of #5000 to the area of the roof to be coated in order to test its performance. Not recommended for application over existing acrylic roof coating. Use #5000 as it comes from the container, no thinning is necessary with this product.

Please Note: This product is not available in California.

Base coating Elastomeric
Brand Lucas
Color Base Coat Gray
Flash point 103°F / 39°C
Material type Styrene
Tensile strength 1600 psi
Weight per gallon 8.8 lbs

Select Brand / Product Range

Location Based - Calculated at checkout
Location Based - Calculated at checkout
Location Based - Calculated at checkout
$80 Per Order
Location Based - Calculated at checkout
FREE DELIVERY
Location Based - Calculated at checkout
Location Based - Calculated at checkout
Location Based - Calculated at checkout
Location Based - Calculated at checkout
Location Based - Calculated at checkout
FREE DELIVERY
Location Based - Calculated at checkout
Location Based - Calculated at checkout
$60 Per Order
$15 Per Order
Location Based - Calculated at checkout
FREE DELIVERY
Location Based - Calculated at checkout
Location Based - Calculated at checkout
$60 Per Roll
60" and 72" are calculated at checkout
Location Based - Calculated at checkout
Location Based - Calculated at checkout
FREE DELIVERY
Location Based - Calculated at checkout

Standard Delivery

All standard orders are subject to a minimum $60 delivery charge once the delivery location is within a 100 mile radius of the supplier. Special order items marked with a "special order" badge may incur alternative delivery charges (see table below). The vast majority of orders (over 90%) are dispatched in 5 - 10 working days. A signature may be required on receipt.  All deliveries are completed by our fleet of partner trucks and distributors. In some remote areas of the US a long distance charge may apply for shipping. This charge will be notified to the customer and agreed before any payment is made. Also this condition may apply for orders whereby the movement of stock is required from one depot to another across long distances or off shore orders. Generally the long distance charge may be requested on orders exceeding 100 miles from our closest depot. Some products such as Spray Foam insulation is a hazardous material and is subject to a delivery charge or bulk buy products are subject to additional delivery charges due to the massive discounts that are available. This is highlighted at the checkout stage of your order.


Delivery Charges

Roofing4US will in most cases email the customer prior to delivery informing the customer of an eta. This is an eta only and is subject to change without notice to the customer. Roofing4US will endeavor to inform the customer of a delay in shipment by email if this may occur.

Deliveries will be notified to the customer by email. If the delivery date does not suit please reply by email a delivery date that suits you. Roofing4US does not accept liability for late deliveries or act of god circumstances that may cause your order to arrive on an alternative delivery time slot or date. Please note deliveries are not made on weekends. The customer is responsible in ensuring that there is an able bodied person at the shipping location on the day of delivery to assist with off loading. Delivery times can be given on the morning of delivery if required. All deliveries are to curb side only and any further handling by our delivery partners is at the discretion of our partner drivers.


SHIPPING PROTECTION

https://roofing4us.com/pages/shipping-protection 


Description

Polymer based Lucas #5100 Thermoplastic Base Coating is an elastomeric solvent based coating intended for the repair and restoration of metal, TPO and Hypalon roofs. Use on barns, warehouses, metal trailers and shipping containers. Ultra-low moisture permeability prevents corrosion while high elasticity allows conformation to building movement.

Lucas #5100 is based on tough, elastic Styrene Ethylene/Butylene Styrene polymers and a clear adhesive hydrocarbon resin in an aromatic hydrocarbon vehicle. High reflectivity is maintained due to the incorporation of high quality titanium dioxide. Additionally, high loadings of antioxidants and light stabilizers ensure durability throughout roof service life.

This product comes in a base coat gray color.

Application:

Surface to be coated must be dry and free of dirt or corrosion particles. All seams, fasteners and penetrations should be sealed with #5500 Seam Sealer. The roof must then be coated with Lucas #5100 Thermoplastic Base Coating at a rate of 1.25-1.5 gallons per 100 square feet. MECHANICALLY MIX coating thoroughly and continuously before and during application. For best results, maintain coating temperature at 70° F or higher. Roof temperature should be above freezing during application.

Once applied, the coating is unaffected by temperature. When the Base Coating is cured, apply the Top Coating at a rate of 1.25-1.5 gallons per 100 square feet. For best results, apply coating in one direction with the slope of the roof. Roofing asphalts may cause staining. As this condition is unpredictable, we recommend that the user apply a small amount of #5000 to the area of the roof to be coated in order to test its performance. Not recommended for application over existing acrylic roof coating. Use #5000 as it comes from the container, no thinning is necessary with this product.

Please Note: This product is not available in California.



Technical Specifications

Base coating Elastomeric
Brand Lucas
Color Base Coat Gray
Flash point 103°F / 39°C
Material type Styrene
Tensile strength 1600 psi
Weight per gallon 8.8 lbs


Reviews


Delivery Information

Select Brand / Product Range

Location Based - Calculated at checkout
Location Based - Calculated at checkout
Location Based - Calculated at checkout
$80 Per Order
Location Based - Calculated at checkout
FREE DELIVERY
Location Based - Calculated at checkout
Location Based - Calculated at checkout
Location Based - Calculated at checkout
Location Based - Calculated at checkout
Location Based - Calculated at checkout
FREE DELIVERY
Location Based - Calculated at checkout
Location Based - Calculated at checkout
$60 Per Order
$15 Per Order
Location Based - Calculated at checkout
FREE DELIVERY
Location Based - Calculated at checkout
Location Based - Calculated at checkout
$60 Per Roll
60" and 72" are calculated at checkout
Location Based - Calculated at checkout
Location Based - Calculated at checkout
FREE DELIVERY
Location Based - Calculated at checkout

Standard Delivery

All standard orders are subject to a minimum $60 delivery charge once the delivery location is within a 100 mile radius of the supplier. Special order items marked with a "special order" badge may incur alternative delivery charges (see table below). The vast majority of orders (over 90%) are dispatched in 5 - 10 working days. A signature may be required on receipt.  All deliveries are completed by our fleet of partner trucks and distributors. In some remote areas of the US a long distance charge may apply for shipping. This charge will be notified to the customer and agreed before any payment is made. Also this condition may apply for orders whereby the movement of stock is required from one depot to another across long distances or off shore orders. Generally the long distance charge may be requested on orders exceeding 100 miles from our closest depot. Some products such as Spray Foam insulation is a hazardous material and is subject to a delivery charge or bulk buy products are subject to additional delivery charges due to the massive discounts that are available. This is highlighted at the checkout stage of your order.


Delivery Charges

Roofing4US will in most cases email the customer prior to delivery informing the customer of an eta. This is an eta only and is subject to change without notice to the customer. Roofing4US will endeavor to inform the customer of a delay in shipment by email if this may occur.

Deliveries will be notified to the customer by email. If the delivery date does not suit please reply by email a delivery date that suits you. Roofing4US does not accept liability for late deliveries or act of god circumstances that may cause your order to arrive on an alternative delivery time slot or date. Please note deliveries are not made on weekends. The customer is responsible in ensuring that there is an able bodied person at the shipping location on the day of delivery to assist with off loading. Delivery times can be given on the morning of delivery if required. All deliveries are to curb side only and any further handling by our delivery partners is at the discretion of our partner drivers.


SHIPPING PROTECTION

https://roofing4us.com/pages/shipping-protection