- 35851375673496, no_call_for_price
- 35851375640728, no_call_for_price
- Regular price
- Sale price
- Regular price
- Unit price
Lucas Thermoplastic Aluminum Roof Coating #3000 - Full Range
Adding product to your cart
Est Delivery between and
Aluminum pigmented asphalt roof coatings have been used successfully for many years to protect asphalt, modified bitumen and metal roofs. Although these products continue to serve the roofing industry as an economical, highly reflective surfacing, there remained an opportunity for improvement.
Lucas #3000 is based on tough Styrene Ethylene/Butylene Styrene polymers and a clear adhesive hydrocarbon resin in an aromatic hydrocarbon vehicle. This product contains no asphalt. High reflectivity is maintained due to the addition of three pounds per gallon of high quality aluminum pigment.
Surface to be coated must be dry and free of dirt or corrosion particles. Low areas of the roof must be given special attention as surface contamination collected in these areas will interfere with adhesion and cause coating failure. MECHANICALLY MIX coating thoroughly and continuously before and during application. Apply evenly with a roller or suitable spray equipment in 2 coats of 1 gallon per sq. each. For best results, roll the coats at opposing angles to each other. Do not apply over fresh roof repairs or coating. Roofing asphalts should be allowed to cure thoroughly to avoid staining. As this condition is unpredictable, we recommend that the user apply a small amount of #3000 to the area of the roof to be coated in order to test its performance. Use #3000 as it comes from the container, no thinning is necessary with this product. Avoid entraining air while mixing the product. In very hot weather entrained air may form bubbles or blisters.
Shelf Life: Two years from the date of manufacture.
Please Note: This product is not available in California.
For information on delivery costs and more click here.