A protective coating intended for application to concrete, masonry and EIFS walls. Lucas #2000 prevents moisture penetration of the masonry surfaces while allowing the passage of moisture vapor out of the wall to minimize spalling. The high elongation exhibited by this product allows it to bridge non-structural cracks. Standard color is gray. Other standard colors and custom colors are available.

Lucas #2000 is formulated from 100% acrylic polymers and high quality inorganic pigments that will not fade. This is a water-based material and must be kept from freezing.

Application:

Mechanically mix before using. Do not store above 90ºF. Apply only at temperatures above 40ºF and rising with less than 90% humidity and no threat of rain for 48 hours. Horizontal surfaces must be power-washed clean with a suitable residue-free detergent such as Lucas #115. The surface may be damp but must be free of standing water. Surface temperatures should be under 100ºF to avoid premature curing.

Caulk any existing cracks or penetrations with Lucas #1500 or #9600 prior to application of the coating and allowed to dry. Apply with a roller or suitable spray equipment at the rate of one gallon per 100 sq. ft. Irregular surfaces such as new CMU and split-face block will require a base coating of Lucas #2100 Block Filler. A second coat of Lucas #2000 is required on new CMU, EIFS, split face block and horizontal surfaces.

Clean up: Soap and water (wet coating).

Shelf Life: One year from the date of manufacture.

Standard Delivery

All standard orders are subject to a minimum $60 delivery charge once the delivery location is within a 100 mile radius of the supplier. Special order items marked with a "special order" badge may incur alternative delivery charges (see table below). The vast majority of orders (over 90%) are dispatched in 5 - 10 working days. A signature may be required on receipt.  All deliveries are completed by our fleet of partner trucks and distributors. In some remote areas of the US a long distance charge may apply for shipping. This charge will be notified to the customer and agreed before any payment is made. Also this condition may apply for orders whereby the movement of stock is required from one depot to another across long distances or off shore orders. Generally the long distance charge may be requested on orders exceeding 100 miles from our closest depot. Some products such as Spray Foam insulation is a hazardous material and is subject to a delivery charge or bulk buy products are subject to additional delivery charges due to the massive discounts that are available. This is highlighted at the checkout stage of your order.

Delivery Charges

Roofing4US will in most cases email the customer prior to delivery informing the customer of an eta. This is an eta only and is subject to change without notice to the customer. Roofing4US will endeavor to inform the customer of a delay in shipment by email if this may occur.

Deliveries will be notified to the customer by email. If the delivery date does not suit please reply by email a delivery date that suits you. Roofing4US does not accept liability for late deliveries or act of god circumstances that may cause your order to arrive on an alternative delivery time slot or date. Please note deliveries are not made on weekends. The customer is responsible in ensuring that there is an able bodied person at the shipping location on the day of delivery to assist with off loading. Delivery times can be given on the morning of delivery if required. All deliveries are to curb side only and any further handling by our delivery partners is at the discretion of our partner drivers.

SHIPPING PROTECTION

https://roofing4us.com/pages/shipping-protection